Strong glue polyethylene powder coating
|
Product description
|
The basic materials of this series product are polyethylene resin. It is a kind of powder coating adding slipping agent, anti-aging agent, etc. with good adhesive force, insulation, low temperature resistant, etc. |
![]() |
|
Powder properties
|
Density
|
0.91 -0.95(Different colors) |
|
Even granularity
|
220-280 microns |
|
Nonvolatile matter content
|
≥ 99.5% |
|
Melting index
|
5-50g/10min |
|
Liquidity
|
Fluidizationfloat upward≥20% |
|
Storage stability
|
Far from fire, lower than 40℃, ventilation, dry, storage for 2 years. |
![]() |
|
Film performance
|
Appearance
|
Eyeballing |
Neat,smooth(Slight wrinkle) |
|
Color
|
GB 9761 |
Eyeballing no obvious difference(compared to standard panel) |
|
Luster60°
|
GB9754 |
≥ 40 |
|
Impact
|
GB/T1732-93 |
1Kg*50cm |
|
Bending
|
GB 6742 |
≤ 2mm |
|
VICAT softening point
( ℃)
|
GB 1633 |
70 ‐ 85 |
|
Electric intensity Kv/mm
|
GB 1408 |
≥ 19 |
|
Volume specific resistivity (Ω·m)
|
GB 1410 |
10 12 ～ 10 15 |
|
Adhesive force
|
10mm width 180 o stripping
|
≥3Kg/10mm( passing) |
|
Cathode stripping resistant
(65℃,48h)
|
SY/T 0442
|
≤2mm |
|
Film thickness
|
GB/T 1764 |
250~600 um |
|
Low temperature resistant
|
Q/HJ 008-2003 |
-35℃ ,60h no cleft |
|
Shore hardness
|
GB/T6739-86 |
45~55 |
|
Chemical agent resistant
|
5%HCL |
GB/T 1865 |
7 days |
Appearance coating no change |
| 5%NaOH |
GB/T 1763 |
7 days |
Appearance coating no change |
| 5%NaCl |
GB/T 176 |
7 days |
Appearance coating no change |
![]() |
| Execution crafts |
- Surface process: According to bottom material performance.
- Parts warm-up temperature: 250 -350 ℃
- Coating in soaking method. After taking it out, put in 180-250 ℃ /0-5min, and then naturally cool to room temperature.
|
![]() |
|
Others
|
Application area
|
It is fit for coating of special chemical equipments, fire protection equipments, etc. |
|
Packing and transportation
|
20Kg in multi-ply paper bags |
|
Safety
|
It is a kind of nontoxic powder coating. It should avoid absorbing bug dust. The operating person should take proper dust mask and glasses. If possible, do not keep it in touch with skin. |
|
|