Super weatherproof type powder coating
|
Product description
|
The basic materials of this series product are saturated carboxyl polyester resin and TGIC firming agent. It is also a kind of thermosetting powder coating with good weatherproof character special for building users. If the execution is accorded with our company’s requirements, the weatherproof can be lasted for 10-15 years. |
![]() |
| Standards |
AAMA2604-98HIGH PERFORMANCE ORGANIC COATING S ON ALUMINUM EXTRUSIONS AND PANELS
GB5237.4-XXXX Aluminum Alloy Building Sectional Material Powder Spraying Sectional Material |
![]() |
|
Powder properties
|
Density
|
1.2~1.8g/cm3 |
|
Granularity
|
The general diameter of particle30~38um，<64um particle proportion>99%, or customizing |
|
Volatility
|
<1% |
|
Softening point
|
60~95℃ changing according to different color luster |
|
Fluidity
|
It has good fluidity and is easy to transportation. The fluidity index can be got from our local liaison office. |
|
Storage stability
|
<30℃Storage,1 year |
![]() |
|
Film performance
|
Appearance
|
Eyeballing |
Many panel effects |
|
Luster60°
|
GB/T9754-88 |
All lusters from 2%～100% |
|
Impact
|
GB/T1732-93 |
1Kg*50cm |
|
Bending
|
GB/T6742-86 |
∮2mm |
|
Concave
|
GB/T9753-88 |
>6mm |
|
Adhesive force
|
GB/T9286-88 |
0 grade |
|
Rigidity
|
GB/T6739-86 |
>H |
|
Poaching
|
96~100℃Distilled water2hours |
Nondiscolouring,no foam formation |
|
Mortar resistant
|
GB/t1594,GBT178,GB5237.4 no obvious change. |
|
Acid resistant
|
5%H2SO4 |
1 year |
Nondiscolouring,no foam formation |
| 48%HCL |
1 month |
| 5%HAC |
1 year |
| 5%H3PO4 |
1 year |
|
Alkali resistant
|
5%NaOH |
30 days |
Slightgloss losing |
| 5%NaCO3 |
30 days |
|
Solvent resistant
|
Acetone |
50 times |
Nondiscolouring,no foam formation |
| Dimethylbenzene |
| Butanone |
| Gasolene |
| Alcohol |
| Ethyl acetate |
|
Thickness of pinhole
|
It is easy to produce pinhole when the film thickness is more than 120um. If the spraying thickness is needed higher than 120um, please tell us in advanced. |
|
Salt spray resistance
|
GB1771-91 |
1000hours |
No change of film, single-side corrosion of underlining is lower than 2mm. This experiment used chromic aluminum panel with the film thickness of 100um. |
|
Muggy resistant
|
GB1740-79 |
1000hours |
Slight gloss losing of film，<1 grade |
|
Light fastness
|
ASTNG53-88 QUV UV313 cycle 4hr UV 60℃
4hr condensation 50℃
|
![]() |
|
Execution conditions
|
Pre process
|
Steel
|
Parkerising treatment
|
|
Aluminum alloy
|
Chromic treatment
|
| Notice: the pre process should be inspected once in 2 hours, and the inspecting methods should be according to the medicine suppliers’ requirements or our company’s pre process introduction. |
|
Spraying
|
This series is fit for the following spraying methods: static spraying; friction static spraying; and some other spraying methods (requiring in advanced). |
| Notice: the pre process should be inspected at least once in 2 hours, and the inspecting methods should be according to the customers’ requirements or our company’s film test methods. |
|
Solidifying conditions
|
It is fit for the following solidifying methods: electric heating, radiating heating, infrared heating, fueling or gas-firing. (Tell us in advanced) Notice: Periodically inspecting |
| Notice: Periodically inspecting |
![]() |
|
Others
|
Quality guarantee
|
After getting our company’s authentication about execution, it can last for 5-10 years. |
|
Application area
|
|
|
Special effect
|
Many effects, such as wrinkle, metal, color blended, etc. for special surface effect coating , please refer to our company’s use guideline. |
|
Packing and transportation
|
20kg in paper skin lined with polyethylene, non-dangerous goods, transported by all kinds of ways, avoiding sunlight, avoiding damp and hot and avoiding in touch with chemical goods. |
|
Safety
|
It has TGIC.Please refer to our company’s operation guideline, and ask our company’s Safety Technology Report from our liaison office. |
|
|